• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Per vedere come funziona, vai al tuo sito pubblicato.
    • Categorie
    • Tutti i post
    • I miei post
    eslam fikry
    07 apr 2021

    Smart switch restarting by itself

    in Wall Switch

    I have issue with Athom smart switch 2 gang it's restarting by itself after 1 or 2 min and turn off the light

    and no response in apple homekit


    11 commenti
    0
    11 commenti

    Condividi i tuoi pensieriIscriviti per lasciare un commento.

    gonzalo_dd
    02 giu 2021

    I see… is it too complex to update via serial port?

    Mi piace
    G
    G D
    G D
    12 ago
    Risposta a

    No problem welding. I understand that if something goes wrong it will be my fault, but anyways in the current state with firmware version 0.2 the switch is unusable and non-upgradable. Can you share some instructions about the actual procedure?

    Mi piace

    Athom_Support
    02 giu 2021

    0.2 may not be able to upgrade, the version must be greater than or equal to 0.3 to upgrade, and the version below 0.2 must be burned through the serial port!

    Mi piace

    gonzalo_dd
    02 giu 2021

    model says SW034US, version 0.2. What address should I send email?

    Mi piace

    Athom_Support
    02 giu 2021

    Take a look at the version number of the switch firmware, the latest version is 0.6, if you need to upgrade, you can contact us by email

    Mi piace

    gonzalo_dd
    02 giu 2021

    I have the same issue. Any solutions?

    Mi piace
    11 commenti
    Post simili
    • Color led switch
    • Tasmota dimmer switch?
    • ESPHome Switches restarting + LED1 (gpio14) problem - restarting SOLVED

    ©2020 by athom.