can that usb c connector use for powering energy meter?
3 commenti
Mi piace
Comments (3)
Non puoi più commentare questo post. Contatta il proprietario del sito per avere più informazioni.
Membro sconosciuto
02 giu 2025
Timo,
Did you get this working for 3phase as you commented elsewhere? If not, here is a yaml that I wrote for a friend who has 3ph and bought one of these units. You'll need to update the subsitutions to reflect what each CT is used for (i.e. CT1 relabel to 'Lights Circuit' etc.
No, the USB-C connector on the ESPHome 6CH Energy Meter is usually for data communication, not for powering the device. It typically requires an external power source for proper operation. Check the official specs or user manual to confirm the exact requirements!
Timo,
Did you get this working for 3phase as you commented elsewhere? If not, here is a yaml that I wrote for a friend who has 3ph and bought one of these units. You'll need to update the subsitutions to reflect what each CT is used for (i.e. CT1 relabel to 'Lights Circuit' etc.
https://github.com/JAComms/MyHomeAssistant/blob/main/esphome/athom-energy-meter-x6.yaml
No, the USB-C connector on the ESPHome 6CH Energy Meter is usually for data communication, not for powering the device. It typically requires an external power source for proper operation. Check the official specs or user manual to confirm the exact requirements!
No, it's just for flash firmware and debug