• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Per vedere come funziona, vai al tuo sito pubblicato.
    • Categorie
    • Tutti i post
    • I miei post
    dmerenne
    22 gen

    Controlling led on smart plug PG01

    in ESPHome Related

    I have this smart plug in my bed room and I'd like for the led to be off even when the switch is off. I tried activating the led in homeassistant and then turning it off but it does not work. I've also been looking at the esphome yml configs on git but they only seem to define a simple blue while it seems the switch also a red led ?

    4 commenti
    0
    4 commenti

    Condividi i tuoi pensieriIscriviti per lasciare un commento.

    dmerenne
    22 gen

    Alright, going to paste something on it then, thanks!

    Mi piace

    dmerenne
    22 gen

    So there is no way to have the relay on with the led off besides opening and unsoldering right ?

    Mi piace
    Athom_Support
    22 gen
    Risposta a

    The red LED is connected to the relay on the hardware, and the software cannot be controlled separately.

    Mi piace

    Athom_Support
    22 gen

    The red LED is synchronized with the relay. Turn on the red LED and turn off the red LED of the relay.

    Mi piace
    4 commenti
    Post simili
    • LED Strip Controller disconnects when LEDs connected
    • Smart plug bricked
    • PG01 dead

    ©2020 by athom.