WLED PD Energy Meter Sounds Reactive Addressable LED Strip Controller
ESP32 -WROOM-32E Chipset
4 Channels
I2S PDM Digital Microphone Built in
Input: 5V-24V
MaxLoad: 16 A
16A fuse
Strip types support: WS2812B WS2811 WS2813 WS2814 WS2815 SK6812 TM1814 APA102 WS2801 LDP8806 GS8208
Type C PD:
Use the selection switch to select 5Vor 12V to match the voltage of your lightstrip.For example, if your light strip is12V,please select the switch to 12V,andthen use the PD adapter to connect toType c.
Energy Meter:
Your strip light consumption monitoring
GPIO:
- Button（GPIO0）
- DAT 1（GPIO18）
- DAT 2（GPIO5）
- DAT 3（GPIO16）
- DAT 4（GPIO17）
- I2S_SDPIN（GPIO32 ）
- I2S_WSPIN（GPIO15 ）
- I2S_CKPIN（-1）
Notice: If you want to upgrade the firmware, please use "WLED_0.x.x_ESP32.bin"
The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
The device firmware uses GPIO18 as the DATA of the WS281X type light strip by default. If you have other types of light strips, please set it on the setting page according to your actual situation