WLED  WS2812B Starter Kit
 
The starter kit includes: ​
​1x LS8P-Dual ESP8285 WLED controller ​
1x 5V10A Power Adaptor ​
1x WS2812B 5m ​
1x DC Cable
​1x User Manual
 
Wire Diagram
 
1. Connect the power cable and strip cable to the controller. ​ ​
2. Connect the strip light to the controller, ensuring that VCC is connected to 5V, DAT to D0, and GND to GND. ​ ​
3.Connect the power adaptor to the controller.
 
 
LS8P-Dual RGBCCT Analog and Addressable Digital Strip Controller.
 
This WLED controller support both analog and addressable strip
Build in ESP8285 chipset with 2M flash
 
• Working voltage: DC5-24V
• Output channel: RGBCCT  and 1CH Addressable 
• Output current:  16A
•Max 384W
 
 
PWM GPIO
R：GPIO5
G：GPIO13
B：GPIO14
CW：GPIO4
WW：GPIO12
 
 
DATA：GPIO1
Button：GPIO0
IR：GPIO2
 
The WS2812B Strip Light
 
Length: 5M
LED: 60leds/m
FPCB Width:10mm
PCB Color: White
WaterProof: IP20 (None-waterproof)
 
The Power Adaptor
 
EU/US/UK Standard Optional
AC Input:110-240V 50/60Hz
DC Output: 5V10A
 
Notice: If you want to upgrade the firmware, please use "WLED_0.x.x_ESP02.bin.gz"
 
Tips
 
1. To reset the controller, please press and hold the key more than 10s
 
2. Upgrade to oifficial firmware might disable some function.
 
To build your own firmware please visit: https://github.com/athom-tech/
 
3. Due to voltage drop, the actual power output of this strip at full brightness is 28W. To achieve equal brightness along the entire length of the strip, we recommend using high-quality wire (not included) to inject power at both ends, which requires a total power input of 42W