DC 5V/DC 7-30V  AC90-250V input  10A relay

 

To enable HomeKit remote control, you need a HomePod, an Apple TV 4K, Apple TV HD, or an iPad. Set any of these Apple devices in your house as a HomeKit bridge and connect it to your home Wi-Fi network. Keep in mind that once your HomeKit bridge is set up, it has to be kept online. If it is powered off or disconnected from the Wi-Fi, it will fail to respond when you intend to control the device remotely.

 

Self-Locking:

 

The default setting of the relay is self-locking 

 

Inching Mode:

 

To change self-locking mode to Inching mode, please follow the instruction below:

 

Please power off the module and use jump wire which included in the box connect GND to RX, like the picture show

 

Operating voltage: 5V/7-30V DC/AC 90-250
relay on/off status respectively
Two input interfaces
Supports to control different voltage ranges
USB port power supply more convenient
Board consumption: <1W
Standby current: 80mA
Max input current: 10A
Max Wattage: 2200W
Relay lifespan: ≥one million times
100M electrical insulation resistance
Electric shock voltage: 1000V
Relay maximum pull time: 15ms
Relay maximum release time: 5ms
Working mode: inching / self-locking
Wireless Standard: 2.4GHz, 802.11 b/g/n
Application: access control, turn on PC, garage door, etc.
Computer application: Remote control computer boot
Operating temperature: -40 degrees to +70 degrees
Operating Humidity 40%-80% RH

 

Homekit 4CH Inching/Self-lock Relay

$28,20 Prezzo regolare
$19,74Prezzo in saldo