The ESP8285 version is discontinued and will be upgrade to ESP32C3 version, expected to be able to ship until mid Dec
Pre Flashed ESPHome With Bluetooth Proxy WiFi Smart GU10 Bulb
Pre configed IOs plug and play
Pre flashed before assembling
Build in ESP32C3 4MB
This 5W smart LED bulb is powered by the ESP32-C3 chip and comes pre-flashed with ESPHome firmware for seamless integration with Home Assistant. Supporting RGBCW (Red, Green, Blue, Cool White, and Warm White) channels, it delivers full-spectrum lighting - from vivid color scenes to cozy warm illumination.
With support for Bluetooth Proxy, this bulb can also extend your Home Assistant's Bluetooth range, making it both a lighting solution and a smart home network enhancer.
Key Features
5W High Brightness Output - Delivers bright and efficient lighting suitable for rooms, offices, and ambient effects.
RGBCW 5-Channel Control - Independent control of RGB + Cool White + Warm White for infinite color and tone customization.
Built on ESP32-C3 - Reliable Wi-Fi and Bluetooth connectivity.
Pre-Flashed with ESPHome - Instantly recognized by Home Assistant, supports OTA updates, and full YAML customization.
Bluetooth Proxy Support - Works as a BLE extender for your Home Assistant ecosystem.
Open Source & Flexible - Fully configurable via ESPHome; modify brightness curves, effects, and automation as you wish.
Local Control, No Cloud - All control runs locally through Home Assistant - no data sharing, no external dependencies.
Compatibility
Home Assistant (ESPHome Integration)
Works with Wi-Fi and BLE Proxy
Customizable YAML Configuration for automation, effects, and sensors
| Item | Specification |
|---|---|
| Model | LB10C3-ESP-1 |
| Base Type | GU10 |
| Power Consumption | 5 Watts |
| Input Voltage | AC 100-265V, 50/60Hz |
| LED Channels | Red, Green, Blue, Cool White, Warm White |
| Color Temperature | 3000K - 6500K (Adjustable) |
| Connectivity | Wi-Fi 2.4GHz (802.11 b/g/n), Bluetooth 5 |
| Chipset | ESP32-C3 (RISC-V, Single-Core, 160MHz) |
| Beam angle | 170 degrees |
| Bluetooth Proxy | Supported (requires configuration) |
| Brightness | 350 Lumens |
| Dimensions | 50 ? 85 mm |
| Certifications | CE, RoHS |
| Operating Temperature | -20?C to 45?C |
For Yaml, please visit:
https://github.com/athom-tech/esp32-configs/blob/main/athom-rgbcw-bulb.yaml
PWM GPIO
- R:GPIO3
- G:GPIO4
- B:GPIO5
- CW:GPIO6
- WW:GPIO7
Notes
Works with 2.4GHz Wi-Fi only (no 5GHz support)
To reset to factory mode: power cycle 7 times quickly
The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
Danger:
If you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case.
Product Highlights
GU10 RGBCW Bulb Made For ESPHome is a local smart lighting product made for ESPHome and Home Assistant. It is designed for users who want reliable room lighting, scenes, dimming, and automation without relying on a cloud platform.
Ideal For
- Room lighting and accent lighting
- Local Home Assistant scenes
- Users who prefer cloud-free control
Compatibility
Designed for local smart home use with Home Assistant. Products marked as Made For ESPHome use the correct Made For ESPHome compatibility wording and are intended for ESPHome-based local control.
