Shipping from Sydney to New Zealand is much slower than shipping from China, We suggest New Zealand buyers choose shipping from China.
 
Pre Flashed ESPhome Australia Plug , Automatically detect by Home Assitant
 
 
Notice:
The plugs shipped after 21st Jan 2022 are upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
 
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
 
 
Build in ESP8285 chipset with 2M flash
 
Yaml File Download:  
https://github.com/athom-tech/athom-configs/blob/main/athom-smart-plug-v2.yaml
 
Specification:
Input voltage：100-240VAC 50/60Hz
Current：10A(Max)
Power rating：2200W
Standard：Australia
Wireless standard：IEEE802.11b/g/n,2.4GHz
Housing Color：Whtie
Size：50mm*50mm*30mm
Operation Temperature：-20℃～+50℃
Plastic material:ABS+PC *Fire-protection rating:94-V0
 
GPIOs:
 
GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 CSE7766 Rx
GPIO4 None
GPIO5 Button1
GPIO9 None
GPIO10 None
GPIO12 Relay1
GPIO13 LedLinki
GPIO14 None
GPIO15 None
GPIO16 None
FLAG None
 
 
The old version ( Shipped before 20th Jan 2022):
 
GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 Button1
GPIO4 BL0937 CF
GPIO5 HLWBL CF1
GPIO9 None
GPIO10 None
GPIO12 HLWBL SELi
GPIO13 LedLink
GPIO14 Relay1
GPIO15 None
GPIO16 None
FLAG None
 
Steps to Install :
 
*Power on the plug
*Use your phone/computer search the SSID: Athom_xxxxxxx
*Connect it and set the SSID and password of your 2.4G WiFI 
*Go your Home Assitant find the new device and complete installation